DMD-21
Best suited for
- High-throughput LCD and MSLA dental labs
- Crown, bridge, orthodontic, and aligner models
From €40.00
Dental Speed and Precision in a Resin Bottle!
Easy to Print with Dental Modelling Resin for Your Practice!
Easy to Work With
DMD-21 resin simplifies 3D printing for orthodontic, implant, and crown models. Its fast-curing formula ensures easy handling, smooth cleanup, and a glossy, non-sticky finish.
Fast Printing and Curing
DMD-21 dental resin offers a low-odor solution for printing implant, wax-up, and orthodontic models with minimal scent, creating a pleasant workspace.
Low-Odor Formula
DMD-21 dental resin offers a low-odor solution for printing implant, wax-up, and orthodontic models with minimal scent, creating a pleasant workspace.
Speed Meets Precision
Meet AmeraLabs DMD-21, the fastest-curing resin for LCD printers.
Designed for orthodontic, implant, and crown models, DMD-21 delivers high-resolution surfaces and pinpoint dimensional accuracy in record time.
No More Sticky Situations
AmeraLabs DMD-21 delivers a smooth, glossy finish that’s never sticky after post-curing.
This fast-curing resin creates precise orthodontic, crown, and implant models with a hard surface (90 Shore D) and aesthetic sand color (LAB 78;6;18).
Streamlined Workflow
Time is a precious resource in any dental practice, and DMD-31 helps you make the most of it. With post-curing times ranging from 5 to 20 minutes depending on your station, this rapid turnaround increases your productivity, allowing you to handle more cases efficiently.
Warped dental models ruining your work?
DMD-21 dental resin ensures exceptional dimensional stability for orthodontic, implant, and crown models. With minimal shrinkage (<1%) and low water absorption (<0.2%), it prevents deformation during and after printing.
Dental 3D Printing Workflow with Post-Processing
Prepare Your Model
Import the STL, orient properly, and add supports if needed. Hollow models where appropriate to save material.
Print with Correct Settings
Use validated printer settings for your specific resin and printer. Maintain room temperature around 22–25 °C.
Post-Processing Made Simple
Wash the print in isopropyl alcohol (IPA) or an approved cleaner for 2–3 minutes.
Dry thoroughly using compressed air or allow to air dry.
Post-cure under UV light as recommended (typically 5–15 minutes).
Remove supports carefully to avoid damaging model.
Polish or finish as needed, depending on application.
Quality Check and Use
Inspect for accuracy, surface finish, and stability before delivering or casting.
Frequently asked questions
How do I decide between DMD-21 and DMD-31?
Pick DMD-21 for speed on LCD and MSLA printers. Pick DMD-31 for maximum accuracy on DLP systems. A lot of labs use both for different cases.
DMD-21 covers high-volume everyday model production. DMD-31 covers precision implant and complex restorative work where the accuracy difference matters.
Why do some models still have fit issues?
Print orientation, support placement, room temperature, and post-processing all affect final accuracy. Validated settings, stable lab conditions, and careful support removal solve most of them.
Small workflow adjustments often make a bigger difference than the resin spec sheet. Printing at 22 to 25 °C and avoiding excessive IPA soaking are the most common fixes.
How long can I store printed models?
Printed models stay accurate for weeks under normal lab conditions. For critical work, use them within one week.
DMD-21 has low water absorption, but temperature and humidity still affect long-term stability. Standard storage protocols (cool, dry, sealed) preserve accuracy on important cases.
What causes yellowing on models?
Over-curing is the most common cause of yellowing. Stop post-curing as soon as the surface is fully non-tacky.
DMD-21 resists yellowing better when you stay within recommended cycles, and it keeps the surface scanner-friendly. Store finished models away from direct sunlight for best colour stability.
Can I print removable dies with DMD-21?
Yes. The hard surface and dimensional stability work well for removable dies and Willi Geller-style models.
The material handles repeated insertion and removal without excessive wear when used with proper technique.
Is DMD-21 fast enough for same-day cases?
Yes. DMD-21 is one of the faster-curing dental model resins, and a lot of labs use it for same-day model production. Full-arch prints typically complete in 45 to 90 minutes at 50 µm.
The combination of quick print times and reliable accuracy keeps the workflow moving and reduces turnaround time on standard cases.
Didn’t Find What Your Practice Needs?
Can’t find the perfect dental resin for your practice? AmeraLabs is constantly crafting innovative resins like DMD-21.
Join our product testing program to try the latest formulas first. Sign up now at AmeraLabs.com!